Back to Blog
Installation
August 20, 2026
9 min

How to Install Air Conditioning Without Damaging a Furnished Apartment in Madrid

Installing AC in a furnished Madrid apartment requires full protection: shoe covers, furniture covers, dust extraction and route planning. Learn the protocol for a clean installation.

How to Install Air Conditioning Without Damaging a Furnished Apartment in Madrid

Installing air conditioning in an already furnished and decorated apartment raises a legitimate concern: will the furniture, floors or walls be damaged? In Madrid, where many rental flats or occupied homes can't be emptied before an installation, the answer isn't to avoid the work — it's to apply a rigorous protection protocol. A clean installation isn't an accident: it's planning.

The protection checklist before starting

Before touching any tool, a professional technician must protect the work area. This is the checklist we apply on every installation in occupied flats:

  • Floors: Neoprene blankets or rigid cardboard covering the path from the entrance to the installation point, especially if there's parquet, wood flooring or microcement.
  • Furniture: Bubble wrap and non-woven covers over sofas, beds, tables and appliances near the drilling area.
  • Walls and corners: Corner protectors along the route of hoses and tools to prevent scuffs on paint or wallpaper.
  • Shoe covers: Mandatory for the entire team from the moment they enter the home.
  • Dust extraction: Industrial vacuum connected directly to the drilling point to capture construction dust before it disperses.

Drilling dust: the invisible enemy

The biggest problem of an installation in a furnished flat isn't a bump or a scratch, but the fine dust generated by drilling the wall for pipe routing. In Madrid's older buildings (brick, plaster or masonry), this dust is extremely fine and settles on furniture, curtains and electronics several metres away. The solution is simultaneous extraction: a construction vacuum connected to the drill bit during drilling captures over 90% of the dust at source.

Route planning to minimise impact

In a furnished flat, the pipe route between the indoor and outdoor units must be planned to avoid moving large furniture or dismantling fitted wardrobes. Where possible, technical corners, bathroom false ceilings or existing ducts are utilised. When the pipe must run exposed, paintable trunking matching the wall colour is used to minimise aesthetic impact.

Situation Solution Impact
Accessible false ceilingPipes hidden above ceilingNone
Technical corner (bathroom, utility)Route through corner with trunkingMinimal
Exposed wall, no alternativePaintable trunking matching wall colourControlled aesthetic
Fitted wardrobe in routeRoute inside wardrobe or relocate splitRequires coordination

Need to install AC in your furnished Madrid flat?

We work with a full protection protocol: shoe covers, furniture covers, dust extraction and deep post-installation cleaning. Fixed quote and 2-year warranty.

WhatsApp: Clean installation in my flat

The drain: preventing stains on walls and furniture

The AC drain pipe condenses water continuously during operation. If this drain isn't installed correctly, water can drip onto furniture, soak the wall or cause damp stains. In furnished flats, the drain must always run inside the wall or through a technical corner, never on the visible face of the wall. The minimum slope must be guaranteed to prevent stagnation that causes odours or blockages.

Post-installation cleaning

A professional installation doesn't end when the unit works, but when the flat is exactly as it was found. The protocol includes:

  • Full vacuuming of the work area and adjacent areas where dust may have settled.
  • Removal of all material waste: pipe offcuts, tape, equipment packaging.
  • Floor cleaning under the protected furniture.
  • Verification that covers and blankets have left no residue.
  • Functional test of the unit in front of the customer with remote and mode explanation.

Installation in rental flats: legal considerations

If the flat is rented, it's advisable to review the lease agreement and consult the landlord before installing. Most rental contracts in Spain allow air conditioning installation as long as the building structure isn't altered and the unit can be removed at the end of the tenancy. Facade modifications (outdoor unit) may require authorisation from the community of owners. For more details on these permissions, see our guide on community permission for installing an outdoor unit in Madrid.

When to call a professional

An air conditioning installation should never be a weekend DIY project in a furnished flat. Handling refrigerant circuits requires F-Gas certification, and a poor installation can cause refrigerant leaks, electrical problems and furniture damage that will cost more than the installation itself. A certified professional guarantees a clean, safe installation with warranty.

Frequently Asked Questions

Is it possible to install AC without emptying the flat?

Yes. With an adequate protection protocol (shoe covers, furniture covers, simultaneous dust extraction and route planning), the installation is carried out without needing to vacate or empty the home.

Does drilling dust stain furniture?

If simultaneous extraction is used during drilling, over 90% of the dust is captured at source. The rest is removed during post-installation cleaning. Without extraction, fine dust can settle several metres away.

Can I install AC in a rented flat?

In most cases yes, as long as the contract allows it and the outdoor unit doesn't require structural facade modifications without community authorisation. Review your contract and consult your landlord.

How long does a clean installation take in a furnished flat?

A basic wall-mounted split takes 4-6 hours including protection, installation and cleaning. Ducted or multi-split systems may require 1-3 days depending on complexity and number of units.